This robot is a professional small humanoid robot consist of full aluminum parts, smooth surface with smooth edges not hurting hands, the metal is unbleached, beautiful and durable. The High Torque Standard Servo Motor with Dual Ball Bearing and Metal Gears. Provides 14kg/cm at 4.8V and 16kg/cm at 6V. Replacement for HS-645MG. Arduino Uno R3 based USB Servo Controller is ideal for making Autonomous and PC based systems which run over Hobby Servo motors. The software helps to develop the complex sequences in real time on the hardware like robotic arms, walkers, bipeds and any other servo controlled system. It also generates Arduino based code for the developed sequence which can be deployed on the controller on board thereby making the robot autonomous. This Package Includes 1 X Arduino Uno R3 based Bluetooth + USB 18 Servo Controller 1 X Lithium Polymer ( Li-Po) Rechargeable Battery 7.4V 1500mAH 20C 17 X Metal Gear Standard Servo Economy 16 x Multipurpose Aluminum Standard Servo Bracket 7 x Short U Shape Aluminum Servo Bracket 4 x Long U Aluminum Servo Bracket 4 x Oblique U Shape Aluminum Servo Bracket 4 x Interconnect Aluminum Servo Bracket 4 x L Shaped Interconnect Servo Bracket 1 x Large U Beam Aluminum Servo Bracket 2 x Robot feet Aluminum Servo Bracket 14 x Miniature Ball Radial Bearing 17 x Metal Horn for Servo 25T 1 x Screw and screw cap set Assembly Manual CD Product Features Arches punching, corner cutting Cost-effective and easy-to-use For hobbyists, robot competition, kids Humanoid robot Colour: Black Size:40cm(H)*23cm(W) Servo Motor Specifications Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -10 to +60 Degree C Operating Speed (4.8V): 0.18sec/60 degrees at no load Operating Speed (6.0V): 0.14sec/60 degrees at no load Stall Torque (4.8V): 14kg/cm Stall Torque (6.0V): 16kg/cm 360 Modifiable: Yes Potentiometer Drive: Indirect Drive Bearing Type: Double Ball Bearing Gear Type: All Metal Gears Connector Wire Length: 12" Dimensions: 1.6" x 0.8"x 1.4" (41 x 20 x 36mm) Weight: 48gm USB Servo Controller Features: Bluetooth interface for wireless controll of robots Controls hobby servos from PC and Microcontroller USB interface Comes Pre-loaded Arduino Uno bootloader Software exports servo sequences to Arduino Uno for running servo sequences Independent range setting for each servo Independent offset, Maximum, Minimum and Direction setting for each servo 0.5-microsecond resolution 50 Hz update rate Small size of 80 X 47 mm Plug and Play, Auto detection of hardware Easy to use software Servo sequencer with speed, delay, goto and many other features Home and neutral position setting Easy to install USB driver and Application software

We will provide Refund policy if return will be under 7 days in Resellable condition .